- Scalping: to remove surface defects such as segregation, slag inclusion, scars, and surface cracks, and improve the surface quality of the sheet. The scalping machine mills both sides and edges of the slab, with a milling speed of 0.2m/s. The maximum thickness to be milled is 6mm, and the weight of the aluminum scraps produced is 383kg per slab, with an aluminum yield of 32.8kg. - Heating: the scalped slab is then heated in a pusher-type furnace at a temperature of 350℃ to 550℃ for 5-8 hours. The furnace is equipped with 5 zones, each with a high-flow air circulation fan installed on the top. The fan operates at a speed of 10-20m/s, consuming 20m3/min of compressed air. There are also 20 natural gas burners installed on the upper part of the furnace, consuming approximately 1200Nm3/h of natural gas. - Hot Rough Rolling: the heated slab is fed into a reversible hot rolling mill, where it undergoes 5 to 13 passes to be reduced to a thickness of 20 to 160mm. - Hot Precision Rolling: the rough rolled plate is further processed in a hot precision rolling mill, with a maximum rolling speed of 480m/s. It undergoes 10 to 18 passes to produce plates or coils with a thickness of 2.5 to 16mm..

5052 aluminum plate for AL-Mg system alloy aluminum plate, is the most widely used kind of rustproof aluminum, high strength and corrosion resistance. Plasticity is still good in semi-cold work hardening, low plasticity in cold work hardening, can be polished. It is generally used for bodywork in tanks. General thickness ranging from 4mm-25mm, width 2000mm, length 3500-7200mm..

5A06 is a high magnesium alloy with good strength, good corrosion resistance and good machinability among non-heat treatable alloys. .

high quality 5086 h116 marine grade aluminum sheet plate for boat building.

6063 aluminum alloy, with high strength and high hardness and good anodic surface oxidation treatment, is the ideal raw material for architectural and industrial aluminum profiles..

.

High Speed Rail Vehicles in Extreme Environments: Aluminum Alloy Applications and Low Temperature Performance Testing..

Looking for high-quality rust and corrosion-resistant marine grade aluminium sheet, Aoyin Marine 5052 Aluminum Sheet, exporting up to 1,000 tons per year, suitable for ship construction and offshore engineering, click to learn more about the specifications and uses of 5052 Marine Aluminum plate.

Discover the Versatility of 5754 Aluminum Checker Plates for Wind Energy Projects. High-quality, durable, and corrosion-resistant checker plate tailored for the demands of wind power applications. Learn more about our aluminium solutions today.

6000 series alloy ,6061 T6 ,6061 T651.